Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Traveling by train from Slobozia at Fetesti
May 3rd day meant to me an opportunity to make a personal journey by train from Slobozia at Fetesti. Obviously I have not missed the opportunity to make the reporter and photographer tried to capture as many images in your route. We made about 90 pictures that I captured from different railway vehicles and equipment to railway stations. Cantons abandoned, locomotives in various color schemes, even antiques besides Fetesti depot, which stood near a steamy hour in which I climbed to the despair of a railway worker full of coolness, that I shouted a few times . Old lady who is resting in the foliage of trees after they beat probably far and wide roads of iron. How many do not know much about nor dumneaei and some vehicles whose pictures I've posted here, any explanation of the connoisseurs will be welcomed and will post them in the right place if readers will dare to send them ...
Pray with all my heart not to be upset because I did not put on any forum or blog where memru, detailed history and photos, but travel fatigue only allowed to insert the few thousand rows. Desire but rather how to share my experience, I determined to try to bring the site today, hoping that tomorrow I will write something more about this trip. Till then let dozens of pictures to speak for me. Thank you!
http://trenulete.info/calatoria-cu-trenul-de-la-slobozia-la-fetesti/
prognosis:
VT 135 PIKO - LED lights
VT 135 PIKO Automotorul arrived in Botosani to install LED lights is ready to go to HP Botosani depot. For lighting I used two-color LED red-yellow pole at zeXstar. First I removed the old lighting becuri.Am had in mind a simple assembly that allows trapped wagon without intervention and without soldering gun hanging electrical wires between the body and chassis. The work was divided into two distinct fronts.
1. Blood collection
2. Body lights
http://trenulete.info/vt-135-piko-lumini-pe-led-uri/
prognosis:
Roco BR 218 - LED illumination http://trenulete.info/br-218-roco-iluminare-pe-led-uri/
Locomotive BR 218 from Roco,with the decoder built, was sent from Depot Sbingu Ploiesti for substantial changes. The owner was unhappy with the light origional quality, yellow LED on the lighthouse and the center position, the lack of red lights and especially in this huge and hideous space prisms of what ought to be the cabin, so the default lack cab. Clearly still a work in two fronts. First I removed the prisms (light guides) and we extracted the original headlamp masks.
1. Making lighting
2. Making cabin
I used the new LED dots of 1.8 mm, white-hot for the light and all LED lights point of 1.8 mm for red positions.
I used a cab to achieve Forex special, 1.2 mm thick. It has a yellow color front and the material is black, which is why I chose this forex, because such residual light is prevented from breaking into the cabin lights.
prognosis:
PIKO BR 185 Connex - LED lighting
Another series of locomotive depot sent from HP and it is Botosani Connex to PIKO BR 185516-2. Arrival in the depot PanArin reason is the change of light bulbs to light emitting diodes.
For this we proceeded to build circuit board distribution box model by the original light guide. I used LED 1.8 mm from the point ...., They have installed after diagram on the site, and the fact the one used in locomotive BR 254 Arco in Ploiesti only in this case I tied each group separately (each cabin) each serially connected with a 820 ohm resistor.
Each plate are glued each five LEDs. Three white and two red parallel alongside each other, but antiparalel with whites. Unfortunately, after a small misunderstanding between me and windosu 'my initial pictures suddenly disappeared from the card, for which, full of gratitude to the RE microsoft, I loosened the locomotive and made other pictures, which are not and as explicit as they were first developed.
Detalii si imagini http://trenulete.info/br-185-connex-piko-iluminare-pe-led-uri/
prognosis:
Roco Locomotive OBB Rh 1142 - improvements
HB depot from Satu Mare, this beautiful locomotive produced by Roco, was sent to Slobozia for installing LED lights on. A model very well done, with many details and multiple accessories. After a full day to painstakingly fit tiny accessories, struts, wipers, electrical outlets, air ducts and even tustucul water spraying on the windshield, I switched to a plan to shift from bulbs to LED sites.
Was more difficult to realize a process by which light can apply this system for locomotive has a guidance system based on light curves, kinda like the BR 218 Roco, the Strategic bypass cab and ends in the right bulb angle of 90 degrees at the end of the prism, the lighthouse at the central front for headlights of position.
For this requirement, we stuck together, the two SMD LEDs Zextar, white-hot. Splice was made to bring in parallel angle of 90 degrees, two LEDs, one for the central lamp and one for position.
Connecting the motherboard I did in the rail supply points, folosid for a red light 1k resistor serially connected with an LED and 820 ohm resistor serially connected with two warm white LED (glued in parallel because they need something more current to be switched). For this type of LED superflux incorporated and one reverse protection diode load (factory, which is particularly effective for protecting the LED), has to fill each group separately by each resistance as I explained above. These LEDs do not allow linking to antiparalel, as shall soon with diode protection.
We highly recommend this type of SMD LED superfulx zeXstar trading at a price without competition, the big advantage is that the building have a reverse voltage protection diode.
Detalii si imagini http://trenulete.info/locomotiva-rh-1142-obb-roco-imbunatatiri/
Навигация
[0] Списък на темите
Премини на пълна версия