Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Black Anna 0-2-0 tank loco
http://trenulete.info/black-anna-0-2-0-tank-loco/
Received from more than one day in decomposed state from a friend abroad, I found this car on the net to be christened "Black Anna 0-2-0 tank loco. There was a time when I searched on the net pictures of her to know what it looks like pieces are missing. Machine does not have pistons boxes, lights, couplers and buffers. Miniature engine was still intact but without coal. In peroada why I rebuilt the engine and collection system after a short test model came into the park for an appointment to repair cold. After a while, Razvan friend request, he went to the locomotive to be turned into something else sacara TT. After another period, she has been requested by another friend of Braila in love with her is a picture that accidentally occur. Razvan but lost and only a few days ago to found an abandoned one of his boxes. Toy came back to me and how not even know how to give the buddy you wanted, I decided now it's time to bring back a life. So after I found some pictures on the net, I started to repair them.
In the first test was performed excellent toy. Tomorrow painting boxes next piston and rebuilding the roof and chimney. Then other small details after ispiratia pictures and even purchased a lighting system thinking. The problem is that metal chassis configuration is just the limit holes Devid lamps back and so difficult to assemble the lights but I will find solution.
Iata si un mic film cu evolutia in probe a Micutei Black ANNA:
http://www.youtube.com/watch?v=mou6lAkhmA8
prognosis:
Today we continued work on this little hazy.
http://trenulete.info/black-anna-0-2-0-tank-loco/
Using 1.2 mm thick ABS have made the roof. Webs are made from strips of cardboard 0.5 mm thick. Residue on the other locomotives have completed parts accessories missing. With connection to air hoses, air tank is made of 5mm plastic bar on the left houses kits ... The remaining couplings Fleischmann model faces to another, and I have reunited couplers locomotive made its backing of the front. A tip pen and a piece of mine I made the chimney (reinforced inside with a piece of cake, which remained in place nerupt fall fest on model). I then painted gloss black (because I currently black mat) parts made with red boxes and pistons and chassis where the pieces were reunited ... I put no standard buffers and that 's cars PIKO. The car is ready to run the diorama ... after the paint dries!
prognosis:
It was solved!
After the first evidence on the diorama I'm not convinced Flaschmann best original couplers. The curves recline on swabs and immediately derailed wagon. Consequently year and I loosened and rebuilt locomotive couplers. In fact I cut the hook from the original joint and combined them with the hook from the hook PIKO changed. A couple reziltat a more flexible and more stable.
Here http://www.youtube.com/watch?v=LPunTh4V-ho movie diorama tests
The only problem is that the barrier is interrupted supply and car stops. I have this problem before and two axle locomotives which lead me to do something grinding area barrier. Otherwise the car behaves very well in a scrap locomotive became something living and very pleasant to look at the diorama in operation. Follow the lighting design and development.
prognosis:
Closed wagon axle, Roco 45941 - Electric Final
http://trenulete.info/vagon-inchis-pe-osii-roco-ho-lampa-finala/
Arrived in Ploiesti for the final wagon lamp assembly was scheduled today to PanArin workshops. The paper began by making contact points. I used elastic copper plate used to shield box tv tuner or radio, fixed on 3mm thick strip of ABS. Rzbate wire through the floor behind the plate painted with black ABS to lose the background.
Inside I used a bridge rectifier and a capacitor 1000μF/25 volts,
fixed in a slot that I cut it in teflon weight so as not to upset the wagon.
Resistance is 980 Ω in series with an LED point of 1.8 mm diameter ɸ lens cap lamp mounted perste I made forex 1 mm thick and painted with glossy black Revel
760mm:
Thats great! I always enjoy the updates from your layout in beautiful Slobozia!
Навигация
[0] Списък на темите
Премини на пълна версия