Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Reconditioning paper produced by 19-67 layout Piko Warburg, continued with the installation of signal achievement police! To this end, we decided that in addition to the classic warning beacon, to beautify the toy with two strobes, especially because my friend Razvan Marin, gave me a flashlight assembly from a damaged bike, but have a chip capable of stroboscopes imitate that I need. Thus, we removed from the casing assembly that flashlight, I adapted to my needs extracting action switch, which I placed in box order. Propriuzis assembly was located on the body, behind the banquet, where we pulled the wires to the wiring done for the Beacon and made the front of the car. When I mounted a flashing white LED Neon, and on stoboscoape I used two blue leds. On this occasion, I have no headlights restored using a transparent Plexiglas 3 mm thick, polished and etched to form dipped in relief with triangular cell so as to resemble as much as I remember it looked original headlights, lost in the fog To illuminate their childhood ... I used two white LED / hot, which will be operated from the switch. Are still working on lighting a stage, I want to mount the first phase in the headlights and rear positions, then adding the signaling system and reversing direction.
On this occasion I repaired and installed the original horn masinutei ....
mill:
good :clapping:
prognosis:
Reconditioning of Wartburg - 6
MOVIE signaling OPERATION DIRECTORATE
http://trenulete.info/reconditionarea-unui-wartburg-% E2% 80% 93-6 /
Work continued with installation of signal change in direction of travel. This facility operates according to the position of the front wheels, so when they are positioned to directly forward, lights are off and run when the car turns left / right indicator lights are blinking on the face and back. Disk command these lights is powered by servo direction and shown in the following picture.
Diodes used are 1.8 mm, punctual type and assembly that provide intermittent comes from another Chinese toy, as for current needs. Toete front lights are on one rigleta, removable by bending without screws and without seams so that it can intervene in ceremonious moment.
fpk1999:
:clapping: :clapping: :clapping:
prognosis:
Rehabilitation of a Rover
http://trenulete.info/reabilitarea-unui-rover/
Another toy, this time something new generation of bought for my child, somewhere in the 90s, after the revolution, this car is still being controlled cable, I think some Chinese, I do not remember. I only know that summer sent to grandparents, Alex, my boy, took the toy with him to court, where participants play their neighbors, took care to dismantle and destroy the Land Rover. But I remember that one day, his grandmother called me call me to court because Alex is no longer stops crying. I found out that because he had broken toy sleep. We promised then that'll fix it, but that it lacked the entire steering system, gearbox and transmission ferfenita was made with the engine torn cabbage and sprockets, in those days forced me to put a toy in a box and let later. I rediscovered a wheelchair looking for Wartburg, otherwise unavailable, and I wanted to be next on the list this car rebilitarilor childhood soul of my son!
Here I am at work! A little discouraged by the lack of gear, I improvised a first engine and transmission gears from the lego games! It was relatively easy to scrape up a gear, especially the engine of lego game already has a three redoubts / and a large gears with teeth rare, are preferable because they produce zgomor so great as those with small teeth. Said and done, only to test my build I found ineffective, whereas in speed / power, the car did not have the necessary strength to climb even moving from linoleum to carpet ...
As such, we went to phase two, eke another gear with parts supplied. We chose a 3-volt little engine from a chinezarie, gears from the mechanism of dismembered dolls and support gear I made to order convenient to just inside the cut surface provided for the original transmission. We used 3 mm thick forex and sometimes a thick ABS ... Finally came a gear solid, quiet and with a speed / power satisfying. In tests, Land Rover has successfully scaled up and put his foot in the way of toys.
I went with the first adjusting direction and had the gift to create the prerequisites for a very precise planning mechanism that will directly drive the toy. I do not think I will mount the signs and directions, but basically you use the same method by servo-drivers used to Wartburg. It's so important that the space inside the toy allows the installation of gadgets and I'll take advantage of this.
If you have such models, you want to give them for reconditioning are happy to buy them because I want to make a small exhibit of old toys rehabilitated. Thank you in advance!
I will return with details depending on the evolution of work!
Навигация
[0] Списък на темите
Премини на пълна версия