Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
Vlado:
:clapping: :clapping: :clapping: :good:
prognosis:
-8 ITB street car
http://trenulete.info/vagonul-de-tramvai-itb-8/
Today we continued powered tractor wagon effective. We developed the most effective for coupling the wagon bogie locomotive mehano ITB. For that I changed some things between bogie so that it properly in place. I tried to give a slightly inclined position to the front of the wagon, as seen in many photos received from Adrian Crenganis in Iasi, which was kind enough to give me the side walls and original designs More photos of car in different positions! We added numerous accessories such as bars, edges bordering the body, superior direction indicators, the roof vents and the central seat of the plate with the number of circulating wagon route. I mounted the motor and dynamically balanced as we weight model. In film you can see how it behaves on Diorama tram from Slobozia. Tomorrow I hope to manage to do pantograph and give a hand to paint model. Bogie and modification follow masks to resemble as much as what is in the ITB wagon wheels.
http://www.youtube.com/watch?v=TJKyX96hdGw
prognosis:
-9 ITB street car end of the first model
http://trenulete.info/vagonul-de-tramvai-itb-9-finalul-primului-model/
Finally, I managed to complete a dream of youth, is to take tram ITB model, wagon childhood marked me! H0 functional model to support Panic released by the company ... that we processed parts by laser cutting. The model is made entirely of wood, plywood of various thicknesses and sometimes I use forex (comatex) 1 mm thick. On windows I used the windows of houses acetoafan, we bonded over obscure self-adhesive film for car windows. Pantograph is made of galvanized and tin wire of 0.5, and the sole is flat copper wire to the hammer. For lights we used two warm white SMD series, a 1k resistor and a diode bridge. Unfortunately I have not been and condenser!
Follow the marking and correction at the windows and then paint the second tram!
http://www.youtube.com/watch?v=hKxpFAlK05U
prognosis:
ITB street car - gasket 2
http://trenulete.info/vagonul-de-tramvai-itb-garnitura-2/
I started working on fitting no. 2 tram classic ITB. This seal will include a tractor trailer model Bucharest and two cars the same type, with three windows plus glass panel on the middle window. And this model is made of wood, plywood namely lime, in various thicknesses from 1 mm wall at 2mm and resp. 3 mm various chassis components. All parts are laser cut by ........, after models made by me in Corel Draw.
Traction model is made using a 12 volt motor bogie locomotive that drives a Mehano. Pantograph is home made from galvanized wire of 0.5 diameter. Ceiling, multi-layer is polished manually! Ballast is made of pieces of lead from the Linotype printing, machine harvest ancient texts!
prognosis:
ITB street car - gasket 2 to final
http://trenulete.info/vagonul-de-tramvai-itb-% E2% 80% 93-seal-2-to-final /
I fulfilled another dream. One of my childhood to see trams running on the diorama from Slobozia. Perhaps these models are not made as would come from a factory gate, molded plastic, but my designs are functional, I'm proud of them.
The inspiration was a tram all of Iasi, slightly modified so that the middle window has sections for ventilation, the variant that I am adopted. We chose as a model of Iasi wagons, so that I wanted to thank my colleagues from Iasi, Adrian Crenganis modellers, who inspired me and helped me with the initial plans and numerous side pictures of the car!
We chose to work with wood, plywood precisely because wood is a living material, with the power of expression, shape and strength. Do not forget that the first models of trams had more wood in composition! Besides, wood glue and paint is compatible with acrylic material that gives you strength. Wood is very easy to be processed by grinding, much-needed operation for this wagon, where the roof is hard to OptIn rounder with plastic polish.
I turned to trams are a passion for inner, older than the trains, and that we finally found the solution of such a car motoring. I'll probably continue with V09 or other model in this series, because this car is as classic and beautiful car that I will achieve by the same methods as those used for the two sets ITB. I hope the models tram made me to be useful to those who love trams and will hold one of their diorama!
http://www.youtube.com/watch?v=crdhPRqWoH4
Навигация
[0] Списък на темите
Премини на пълна версия