Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Soller, Mallorca, a classic promenade tram
http://trenulete.info/soller-mallorca-un-tramvai-clasic-de-promenada/
This is my last work in the tram and even in railway models. Last years accumulated fatigue, lack of parts and very poor health, obliges me to give up that passion. Hoping that my work was good inspiration for railway enthusiasts, I present to drag the last model made entirely home-Mallorca Soller tram.
I used to coach and a tractor mechanic from a locomotive bogie Mehano, American, slightly worn and mechanical problems. I reconditioned axle bushings axes because they were enlarged and axles played awful in their position, lifting and down in a horrific tram walking forward / backward. Also, the bogie tractor, we replaced the original slides that the current collection on the inside wheel, making the collection is quite bad, because their axles were playing in the bushes. I rebuilt the chord guitar tabs # 1 in thickness. I designed to pressure the bandage style wheels, thus providing, in addition to regular contact more strongly, even a slight permanent suspension and wheels keep on track.
The base material was and fiber form of plywood lenmoasa 1, 3 and 4 mm thick, cut with laser technology as a project for my computer, with the documentation some pictures from the Internet of Soller, Mallorca famous cars. Outstanding tourist variants are many. It was quite difficult to choose a particular model of car trailer. For the original versions are varnished wood, as we did with the model. I painted only torches and roof. Pantograph is 0.5 mm thick galvanized wire.
prognosis:
Maintenance tram G 15-3199
http://trenulete.info/tramvaiul-de-intretinere-g-15-3199/
My last wrinkle, tram maintenance, which should not be missing from a depot that respect. Taking advantage of the last bogie engine that I have it, I built this set of tram maintenance and troubleshooting. My model is very familiar, because I played with him tram simulator. Runs flawlessly on board trams Trams Constanta MSTS. In fact, the model we used the simulator even SView images to create plans in Corel. We used as basic material on various types of lime plywood, balsa 1,2,3,4 and 5 mm thick pieces of laser cut.
For tractor wagon, we used a bogie from American Mehano destroyed. I replaced the wheels of 12 mm diameter, with some Mehano wagon, the 9 mm diameter, the smallest that we had. During dismantling, we replaced and type collection system inside the wheel, with one personal innovation, which collects the current bandage string guitar using a wheel, very good elastic material. Situated above the chord guitar arculetul has meant to you pressed wheels himself. On this occasion, I got no will of my confirmation design deficiency DA locomotive 060, which is so well known for its duck walking drunk. Basically, if the press wheels above, and these camps are larger pivots around walking gear, left and right, trepidand DA's also easy. Most likely reduce the distance you move freely in the axle mounting bush to remove visually annoying vibration, although, technically, this improves contact with the rail.
For cars towed, we used the electric boghie piko old model (E42) that have changed balansierele removing and fixing parts of additional springs. In fact to be derived unvagon carried sand, used for spreading winter skid material. As we used some type wheels Marklin, who were put through in a short axis. I replaced the metal with a plastic shaft, a stick of candy, according to diameter.
One of these cars, is collecting all of the guitar string to mount the front position. Inside the bogie, generous space allowed me to place a plaque in blood collection, a bridge rectifier, the capacitor is located above the stabilization in the bucket. To hide the capacitor, I made loads of sand mixed with glue and mounted over a very thin film acetofan, cut to final shape of the inside tip. After drying, remove the load above the access to the condenser. Diode lamps are two 1.8-mm diameter lens point, in series with a resistor of 980 K. It should also be made from a wagon equipped with miniexcavatorul, but that after you purchase an excavator scale 1 / 87.
I used spray paint GalbenTaxi, matte black frame and gray to blue roof. lighthouse will be central to the tractor in bipolar diode bicolor white / red. I have to do the next day and set pantograph swing axle bogie used the tractor. I used to drive motor 12 volt utimul of equipment PanArin workshops, which ends his career with the paper manufacturer. Most likely to remain only maintenance work! No budget or health condition and lack of fulfillment other parts nevesare designing and great dreams, I do not allow the work to my favorite toys. For bars up I used paper stapler staples of 8 mm length. I had to plan a set of VT 35 and the famous Malaxa, but the reasons mentioned above, projects will be canceled permanently. With this post conception conclude the series of materials displayed on the site that I designed coverage passion for trains. I will probably continue to post on my site, but I will summarize the presentations of various models sold in Romania. I hope with all my heart that my efforts to photograph, write and present material on the site to be useful in the field of railway enthusiasts of the models.
prognosis:
Maintenance tram G 15-3199 on final
http://trenulete.info/tramvaiul-de-intretinere-g-15-% E2% 80% 93-3199-to-end /
After two days I lay .... Today I resumed work on the tram pantograph and I finished that I made the paper clip wire. I first made a wooden template, which I doubted at the same rate pantograph parts. I soldered together, and I did feet of copper wire beaten with a hammer on the bench ... Last night I managed to mount and tractor wagon lighthouse in 3199. We used two SMD LEDs, placed in antiparallel and in series with a resistor 1kohm. We Lestat and I did the test on Slobozia Diorama. Merge balanced, but runs too hard because I had little engine 12 volts and I used a 9 volt. Therefore runs much faster than other trams. Unfortunately we have exhausted the reserve of the latter tram engine, which is definitely my last paper models.
However, yesterday I was still a great joy! After years of struggling I improvised with a hand drill me a windshield wiper motor IMS, yesterday I received, thanks to a barter with a client in Sibiu, a hand drill, miniature beauty, very practical. What I did not have funding for its original feeder, I improvised ... a feeder in the famous FZ1 and I can say it works well. The only change in the FZ1 is required to add a filtration system / stabilization capacitor and diode based on further. Perhaps as we work to drill a very good and necessary tool, but until now I never allowed to take it.
and videos:
http://www.youtube.com/watch?v=SRbEFfZy49A
prognosis:
In Lima Locomotive E 656 - improvements
http://trenulete.info/locomotiva-e-656-de-la-lima-imbunata% C8% 9Biri /
Material presented in here, locomotive has undergone changes to improve the model.
1. I added collection system voltages on two wheels, the tires without adhesion, the bogie tractor. I made slide collection of guitar chord number 1 in thickness, fixed to the bogie engine as shown in the gallery.
2. I added blood collection system and the bogie in the middle, using the remaining blades of American boghiele Mehano used to trams. Slides were mounted with hot solder as shown in the gallery.
3. I mounted lighting system based on warm white LEDs. After all these years I've been lighting enthusiasts locomotives of various types, after I went through hundreds of locomotives hand, after I looked at various forums on the phenomenon of light locomotives, we came to some conclusions:
A red light is just a fad to locomotives and locomotive is not justified unless that is designed to run no trains;
B. The white / white depending on direction of travel is best suited for running locomotives with trains;
c. is rather embarrassing fact that Analog seal off the lights go out at the signal ...
With regard to point C, I thought and changed his mind many variants of solving the problem. In all these years I did many tests on the ideas we had. Most unsatisfactory and as such we have not published my studies in the field. But even with this engine I could put my plan. Today is the ONLY Analog locomotives that can be stopped at traffic lights and which lights should not be left. The whole system is designed without the involvement of electronics! Designed system is able to provide me the stop lights on a non-powered section in analog, and the effect is the same as in digital locomotive standing still At the traffic light and lights are on! As long as lines are supplied with electricity, lights are lit! So, I solved a problem that runs in ANALOG locomotives!
For fitting we used lamps propiuzisa the point LED, white / hot, 1.8 mm lens diameter, mounted in parallel, as in analog to burn brightly even at the lowest speed. Previously, we cut the material transparent glass body so to speak, which were attached and prisms (guides) of light that enters their dwellings. Then we remove the central guide to the lighthouse, leaving it blank for light. LED central headlight was slightly polished and rounded on one side to join the ceiling recess. Parties around the headlights were painted with black acrylic matte that generated by the LED light will not pierce through the body.
All three LEDs for a management position, are mounted in parallel and then in series with a resistor of 1 kohm and mounted in anti-parallel between the two management positions, so to change the direction of travel, to ignite different for each post driving out the direction of travel. By fitting in antiparallel ensure current and residual polarization reverse takeover. I resistor assembly with appropriate even in the middle, the interior of the bellows joint slots locomotive.
The complete removal of the drive system, I found using an engine made in China, with port-metallic brushes, as cheap Chinese toys. I just replaced the engine cover, with one having port-based brushes coal, which both improved the car's noise factor, and the life of the toy in intense turnover regime.
Finally, you just have to admit that I was inspired to change the toys, failed to implement a lighting system that you bake for a long time, and now I want to apply it to other PanArin locomotive depot, specialized depot only in analog locomotive!
prognosis:
http://trenulete.info/locomotiva-electrica-e-656-lima-filmul/
Навигация
[0] Списък на темите
Премини на пълна версия