EA 060 from Railway Memories
How am I doing to improve lighting in Analog
Well, first I changed the jumper position for only the position lights on both ends, so that the two yellow LED smd (God knows why they chose that color!), The position lights, come in series with two 271 ohm resistors, a total of 542 ohm ballast.
I stopped then scratch line plus (+) central headlamp, eliminating their inserierea position lights.
I brought a strap that I fed plus central lighthouse, directly, bypassing inseriarea with position lights.
From out of the diode polarity direction, I took through a resistor voltage the 580 IMO, I applied to the minus two SMD's central headlight and so I fed identically by each ballast resistance different but similar in value, each group of lighting, both above and below.
http://trenulete.info/060-ea-de-la-amintiri-feroviare/