Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
EA 060 from Railway Memories
How am I doing to improve lighting in Analog
Well, first I changed the jumper position for only the position lights on both ends, so that the two yellow LED smd (God knows why they chose that color!), The position lights, come in series with two 271 ohm resistors, a total of 542 ohm ballast.
I stopped then scratch line plus (+) central headlamp, eliminating their inserierea position lights.
I brought a strap that I fed plus central lighthouse, directly, bypassing inseriarea with position lights.
From out of the diode polarity direction, I took through a resistor voltage the 580 IMO, I applied to the minus two SMD's central headlight and so I fed identically by each ballast resistance different but similar in value, each group of lighting, both above and below.
http://trenulete.info/060-ea-de-la-amintiri-feroviare/
piko1:
hey man very nice work nice too see that you are all right :drinks:
prognosis:
--- Цитат на: piko1 link=topic=1087.msg75787#msg75787 date=1333341801 ---hey man very nice work nice too see that you are all right :drinks:
--- Край на цитат ---
Hello! I was very sick in the last 5 months! Glad to see you again dear bulgarian friends!
Adrian:
Don't give up , man !! Trains forever !
piko1:
don't give-up man and you are going to live even 95-100 years just when you turn on 95 you will remember what one Bulgarian say'd to you :yes:
Навигация
[0] Списък на темите
Премини на пълна версия