Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Lighting columns economic
Most of the lighting columns in Slobozia Diorama are made by me and are based on one 12-volt Miniature beculeţ. How the diorama are also about 40 columns, consumption is high enough, that on the one hand, and from another perspective, the original model created by suits me more platforms, parks, private gardens and less street.
Therefore we decided remobilarea town street lighting poles something more specific, the light sent down the asphalt. Also the model that we created now uses the familiar warm white LEDs from zeXstar.
http://trenulete.info/stalpi-de-iluminat-economici/
Ivo Nedkov:
Hello. This is excellent idea!!! :good:
prognosis:
I have spread and toy and I carefully studied the issue. Noise which aroused after installing lighting came from the fact that I stuck blades contact the electrical contacts engine, which immobilize it against the axis on which to work. The engine is initially placed on a small bed and set the base cloth with an elastic tape which gives them some flexibility in relation to the worm axes. So after I replaced the soldering of a flexible wire, the noise has subsided back to what it was before.
http://trenulete.info/rectificare-automotorul-vt-135/
prognosis:
After I created all lighting poles as described in Pillars economic lighting, I went to replace the whole lighting system diorama. First we changed the old PC power 200 W with a new, ATX, the 450W. The new source is still an output of 3 volts, which I dedicated exclusively a public lighting. The advantage is that we gave to all resistances of which were serial 1200k LEDs on the diorama. For public lighting (which is on my diorama of a total of 31 poles), we used a single resistor which supplies 22 ohmi/300W entire network. I left the platform pillars with shade only in the schoolyard and we also placed two pillars in the little park, is more suitable for this place. They remained at 12 volts fed through a resistor 10 ohmi/3w. I intend in the near future as its food on a 3 volt output of all LEDs on the diorama, including those at traffic lights.
Unfortunately the camera did not capture the beauty of the new street lighting. Everything seems real maii, roads are well lit and evenly. On the other hand, we have substantially reduced consumption and thereby protecting the source.
http://trenulete.info/diorama-de-la-slobozia-11-01-2010/
prognosis:
For taller towers in depot yard I used 5mm LED
The yard was made for all LED warm white from zeXstar. We used the same technique as a cap lampshade washer, but the LEDs used were those older than 5 mm diamentru to look like huge spotlights the yard.
After bending legs in proper position, I made a template on a piece of wood for their position in the soldering of tin with each other and the thread of connection.
VARNISH tube with a green, the installation of aeration tank, I made shade, after which I polished lens LED. For polishing I used mine and one other innovation that is a hard drive failure that I rearranged turntables so as to come up last drive, over which we have stuck with prenadez an emery disc. It turns out to be a very useful man near the house ...
After I cut paste to move two feet to LED, I plugged it back with cyanoacrylate and we all gray vosit Revel.
Also on this occasion I changed the pillars classic arched lights with LED 3mm diameter prepared by the same methods. To make no metal inside the table, I shortened one leg longer and I applied black vpsea inside before fixing the LED in the right position.
http://trenulete.info/stalpi-de-iluminat-economici/
Навигация
[0] Списък на темите
Премини на пълна версия