Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Renault Traffic rail HO (home made)
Very nice toy impressed by the sesancave pe forumul lokomotiv, I decided it was time to make my own cars that run on the diorama in Slobozia. I chose the little cars in the collection, a little more roomy minivan since masking engine and power accessories that you will use. I chose a yellow for the perfect the image will be a vehicle maintenance or post.
Unfortunately, all my magazine mini electric motors, none coresounde requirements. All are powered at voltages between 3 and 5 volts which leads to printing an excessive speed of the vehicle. I know there is this model of engine power to 12 volts, because I like the black one Anna, but do not intend to rob, so this project will remain on hold until / if I get a motor wound for 12 volts ... So as now provided, the vehicle works perfectly ... in digital, where speed can be determined more easily than other vehicles, but similar, overly hard on the diorama runs ... as seen next film>>> http://trenulete .info/renault-traffic-h0-home-made /
toniemi:
--- Цитат на: prognosis link=topic=1087.msg45366#msg45366 date=1282668348 ---Renault Traffic rail HO (home made)
--- Край на цитат ---
:good: :good: :good: :good: :good: :good: :hi: :hi: :hi: :hi: :hi:
n_sirakov:
:hi:
prognosis:
Today I did lighting. First, we made both by external hardships under chassis platform as well as inside, so I brought the toy to 100 grams as well stay on line. I slowed down behind a car with other pieces of lead even in the right worm shaft so as to be better adherence.
Should mention that the axle slots are not perfectly perpendicular. They are deeper side so that the contact pressure spring (made of elastic cords guitar), axles sits better on the irregularities themselves. The main counterweight, the inside, I placed the stick with double-sided tape, nice LED lights and strength back. On the side are nice weight to fall fest circuit between blades stuck on the bottom. Thus, the mechanism with light weight can be removed only by drawing with surinta and electrical contact is made with copper strips between weight and elastic bottom engine box. I thought so just because the equipment must be completely removable in order to intervene whenever cleaning or changing the engine. Virtually out of the engine box, no other piece is not bonded. All weights are caught with screws.
Headlight in front, I made a second circuit board and a rezistorde SMD 820 ohms in series, like what goes into the chassis and a place whose nature and they pressed on taking over the current need of contact blades.
Movie monster run in the samples
After I started working on my little Ford Traffic trolley, I searched the net and see if there was something I found on various forums and sites with many images trolley, most narrow lines. Will present with you these images and links to those sites, oentru those who want to document better.
http://trenulete.info/drezine-pe-linii/
prognosis:
Renault Traffic HO rails - Part Three
I revived SlotCar engines that had endowed by their rewinding. Basically we rewinding one from each model as he had two types. Some Chinese from ruin and some german cars more, something more of God-help. The first 175 were wound with many turns on each pole, and 210 seconds were many turns on each pole. By dismantling a transformer used, we recovered a portion of wire winding wire which in my opinion (I micrometer and no marking of traffic was not decipherable) was about the required thickness. Was to know exactly correct wire diameter, but ... this is, with this scroll. Full of envy, I can not help remarking modelers benefit from other countries, which provide many opportunities to buy parts they need, engines, axles, gears, transmission group, winding wire, etc.. and thus they remain time and energy to deal with Modeling proper. I am forced to use thereof for the preparation of material I need. Winding engine is very difficult, requiring patience and meticulously wire and very carefully. What I say to manufacture a group of transmission using a drill ... Anyway, the result counts! And is a joy to see the engines made by Spira Spira, produce results and the book revolve. Have to specify that I met the two types of engines, different versions of the coil binding, although in practice, the engines are the same. I searched the net information about something, but are either not or do not know exactly how I was looking because I found Illustrating this data. We chose to connect each engine model that was linked to the original coils. Even the German model coil was interrupted and not working, the plan is to rewind time on my list of expectations, but such an operation meticulously prevented me a while to get to work. But you need to learn and push yourself back to do the right thing.
After rewinding, the engines have responded correctly to commands and at a speed slightly smaller and closer to what I needed. Basically we have a total of 280 turns on each pole in both engines. After my calculations would have about 320 turns to a section of wire but something less than I did. Thickness not allowed me to more coil turns. The Chinese are collectors of elastic strip copper sheet, as in almost all the toys, Chinese and German engines are powered by coal collected pills, which makes them something more stable, more durable and more silentiose. Winding wire in the end I fixed it with some nail polish for your wife, for stray hairs that have over-loaded poles, do not jump at them and breaking contact with the motor magnets. The gauge on my decrepit and barely read, I did section and found to be identical between the Chinese and German. The desire was to give these mini-motor general, especially since I planned to do and crane units in the previous post. For it but I need some pictures from another angle and try to reproduce them and hope that you find a colleague from Brasov to Sinaia to seize the vehicle in the photographic image and thus help me to replicate this scale vehicle.
Otherwise let the images speak ... http://trenulete.info/renault-traffic-ho-pe- 99ine-%% C8% E2% 80% 93-by-the-third /
Навигация
[0] Списък на темите
Премини на пълна версия