Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
UPS! I try me to but I can't find for free!
prognosis:
Public Toilets - home made of cardboard
http://trenulete.info/toaleta-publica-home-made-din-carton/
A piece of resistance, always present in the urban railway, the public toilet. Toilet, as this building is named in Romania. How we planned a long time making this work, as my latest achievements in the field of railway scale models were made at home by focusing on building paper models of Auhagen, I thought it was time to equip future workshops PanArin depot with such work. The project we have made the PC using Corel Draw and different textures on the net free. The pictures were great inspiration that you've done this summer the station's toilet Slobozia Veche, a book that I adapted it to the position it will have on my minidiorama depot. I mean we changed the input side.
Too many would not have to say about this building, being built by the methods described above all the buildings made of paper. To this, in particular, can observe the surrounding walls with oversized foundation. Because of the work done directly on the computer, I have a few small errors in the design side of the wall stuff that I will address today the painting project.
Who is interested in plans, contact me by email prognoza @ gmail. com cost nothing! It's free!
Finally, although it is a public toilet door, I hope with all my heart that my work is not ... shit! :yahoo:
760mm:
"A piece of resistance, always present in the urban railway, the public toilet."
:)))
Cool toilets!
prognosis:
Blacksmith Age 3 - home made
http://trenulete.info/fierarie-epoca-3-home-made/
Series cardboard buildings, buildings that will decorate my next section of the diorama, the depot three times, continued to forge achievement and associated warehouses. The work was made of cardboard and laser printed on A4 paper model building, model made in 2005 by American colleague, Godwin T. Petermann. In principle, the work was performed by the same methods described in papers presented before the board, except as window model, which border and inner comic. If only the paper work the plan, their location was not problematic, but only the paper work shows no resistance to manipulation or accidental harm. I have double walls with cardboard pressboard, 1 mm thick, which led to the placement of windows such complication. Basically, I cut cardboard, and then I installed windows over them, I stuck to walls. The benefit shows as a more detailed reperezentari.
Doors, wood type, and are open to the outside surface of the building, from previous models. steps we've not made of paper, too complicated when I comatex handy, of which we have made so much easier. In addition, extra support added to the bottom, the base is designed to inside walls, which I pasted below it, adding concrete driveway surface around the building. The forging furnace chimney hardware, I replaced mine with a piece of paper in pencil, which perfectly mimics the final piping. In addition, the bridge above the door, I placed a lamp shade made of white light / warm, polished lens. Abajurl is a metal washer, glued to drop the light and then painted black. Inside the wall we put 1k resistor in series with the lamp in question. Base building is trimmed to be introduced to the inner light and have a smoke generator in a Chinese toy on the batteries, I installed the generator in the building and I'll connect to the chimney of the forge.
Finally I added a few scattered bushes beside the chimney and corners of the building, befitting an annex to draw neaose! I will continue and draws a small achievement for a locomotive, and several other appendices perecum of a small depot. If you get the plans for a circular draws three lines, I try to do and such a building project.
prognosis:
Draw small home made http://trenulete.info/remiza-mica-home-made/
An interesting draw, from the base at Fleischmann, has been the subject of my work lately. On the original board, we found inconsistencies between rates written in the drawing and the actual size pieces. Also, the design lacked some components, while others were badly cut. Although I wanted very much a unique draw for my locomotive, I could not use the board and as such we decided Fleischmann recreating the entire drawing. Basically I redesigned by reshaping hall by drawing walls and interior parts so you can use transparent windows and nice to see inside. Finally, the redesign draw on three A4 sheets, up from an initial, I rushed to print after print and I attacked the little hall diligently. Naturally I used the method that I used in my work presentation based on the drawing board and pressboard, the method is not much point to describe in detail.
Es-For its doors open as if it had hinges, I used paper that I gummed it in advance by anointing them with prenadez both sides, so that after drying, this vision of flexible and probabilities without breaking layer prenadez elastic and ensuring durability and mobility. Although the original design to provide windows and doors, created as a model rather childish, I finally decided that the door was not fitted with windows, patterned after the Auhagen did last year.
-At first we decided to achieve the outside, so that the whole building to blend perfectly on the outside, both the windows and cut corners. After closing the main hall, time for the magazine, the building behind the hall, all crafted from strips of cardboard pressboard, which I stuck over the end walls printed on A4 paper.
- He followed the building of glass and window frame transparency, the draw Auhagen patented method. I used black paper, packages from some old fart black and white photographs, maps packed they were to be protected from penetration of light, the paper is that the thing that does not allow light through, very suited to my frame windows ...
- So I cut strips of 1.5 mm and 2.2 mm thick, to make them bay window frames, big enough area. Support base, glass in my case being a simple self-adhesive transparent window lying beautiful model, for then he has woven the correct model, just after the original.
- Finally, windows were plastered on walls and over them I stuck with zidatia interior design, after I cut the original windows of course ...
- He attended the manufacturing floor interior, raised pavement so that they can more easily reach the locomotive depot artisans of PanArin ... Also I made the motherboard, that the sidewalk surrounding the building of the forex of 2.5 mm , then painted in gray. Platforms raised interior will be decorated with yellow stripes flank protection and they will line the interior, where I intend to mount a channel and Enterprise. Otherwise will follow the installation of lighting and installation before he made the roof, but they are subjects Days next activity.
Навигация
[0] Списък на темите
Премини на пълна версия