Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Next I proceeded to achieve lighting of the hall.
http://trenulete.info/remiza-mica-home-made/
I used yellow LED, 3 mm, for several reasons.
1. Draw time is 3, so neon lighting is excluded
2. These LED light is close to that of incandescent bulbs in those years
3. ... I do not have LED white hot!
Thus, in the hall were mounted three LEDs, and one above the hall door, the lamp shade comes with washer and cap made of metal, stuck with superglue and painted black. All LEDs were polished to remove the effect of head magnifying glass and their similarity with a lamp shade.
Photo
Because LDH removable roof advised me to do, I gave up and I thought of sticking a blood collection system, which we have made use plugs from sockets for integrated circuits. I cut the two groups of two jacks, which I pasted on the wall behind a shed, which I connected to wires that come under the power draw to the board diorama, and one on the roof the roof, the LED constable sites through a 820 ohm resistor serially connected with the ceiling lights. All installation will power, as all buildings deltfel my 12-volt outlet stabilized 420 watt computer power, fueling my diorama.
Photo
I have LEDs mounted on the ceiling with duct tape, after which I pasted cardboard guides on all sides by walls blend with the shed roof, then I "Tecu and whitewashed ceiling using white photocopy paper. Finally, the roof is very easily extracted from the building and allow such intervention inside the shed, all this because someone wrote to me like building a house with a Barbie or Thomas drew! Anyway, now I am offered the opportunity to mount various accessories inside a familiar draws. Tool chests, work benches, trash, artisans and other small things that I made the journey. How PanArin Depot is equipped with a crane and a wagon catenary maintenance probably will develop the idea for each of them a box realixand related games ...
Photo
Most likely is the work of the doors for other interventions, to mount windows ...
lubo_gumata:
:good: :hi:
prognosis:
As already formed a small refrigerator gasket 6, I decided it was time to equip the train with a final lamp, cargo traffic is carried on more night Blumenberg. We chose a car from Liliput for coupling installation, simpler than the similar Roco, allowing trouble-free installation piece collection wagon axle.
http://trenulete.info/vagon-frigorific-liliput-lampa-finala/
The truck is composed of chassis and body with a roof, which is mounted by two bolts with hot melted end. I cut out the bubbly to break the climb and I disconnected the two components. For their refixarea I Drill spindle attachment, first with 1 mm to 2 mm and then to use minisuruburi. They are obtained with optical drives like crazy from the dismantling of deterioration, and removed from the powerful magnets.
The lantern is made of 3 mm thick and forex is provided by an LED light 2mm diameter, mounted through the wall pressure in the lantern, so they easily can be removed for any subsequent interventions ...
Part p energy is provided by bridge rectifier, 2200 micro/16volti an electrolytic capacitor, a resistance of 920 ohms. The entire assembly is mounted on the chassis floor with double-adhesive tape.
Current collection is polarized differently on each axle. To pass to the top of the chassis, we made 1.5 mm diameter holes through the plate weight.
As shown in the picture, the lamp continues to burn even after lifting itself ....
Adrian:
:good: perfect !
prognosis:
Monastery Home Made
Zuge Dorfkirche the building (www.bahnsteig.de)
http://trenulete.info/manastire-home-made/
The paper made of cardboard, by methods described in the previous buildings, is a Catholic monastery type.
-The model is printed on laser printer paper, cardboard applied on 1 mm thick pressboard.
-cut and imitation glass windows made of medical adhesive that mimics the grain semi-transparent opaque glass, windows frames and edges black photo paper.
Otherwise let the images speak for themselves, any comment is superfluous ...
Who is interested in models made by me in paper and cardboard, can contact me by email.
Навигация
[0] Списък на темите
Премини на пълна версия