Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Home made crane wagon - 4
http://trenulete.info/vagon-macara-home-made---4/
We continued work on crane car. After I made the crane arm and the truck, I cut I made and installed shutters and staircase of Forex 1mm thick steel string guitar no. 3 for railings. I painted the deck properly, shutters, stairs and rest of ingredients using acrylic Revell.
I mounted headlamps moved forward, one at each pole crane cabin.
To support various bars and other trinkets will be mounted at the end, and after connecting the corresponding ballasted electric lights ...
Followed by a series of small things that will complete this first model made for me by a model. I mention that I had listed plans, worked only when measured against the images and photos found on the net. I'm sure I missed many more like I was wrong, but my first attempt is pretty good. I already know what's wrong, I already know what should be done differently and probably the next model will provide more attention to for a more accurate reproduction.
The first workers who have already taken delivery wagon to accommodate him and for specialized tests ...
Iata si filmul evolutiei lucrarilor la acest vagon-macara
http://www.youtube.com/watch?v=utovZ3actqs
toniemi:
super :good: :good: :good: :good:
XRISTO:
:ok: :hi: :hi: :hi:
prognosis:
Home made crane wagon - 5 http://trenulete.info/vagon-macara-home-made-5/
Today we managed to bring the final stage wagon crane began last week. Thus, the platform after we cut the shutters and I mounted the stairs and railings, we continued with the final fitting red lamps, one on each end, positioned on the right. I used LEDs that go through the shutter and red dots are connected in series with a resistor of 980 ohms and turns antiparalel so each depending on the direction of travel. I thought whole circuit positioned beneath the floor, so that model to be able to remove without the intervention of soldering gun. I thought of taking blood from the plate located on the chassis through contact lameme guitar made of rope and attached to another circuit board located under the bridge, thus, bridge into place by pressing them and ensure electrical contact. From the same point and lights are powered lights in the cabin but connected through another resistor and installed as the red.
I redid the first cart that I lost the house and after 4 hours of searching I gave up on him ...
Of forex and I made the hook body. Pulley is made as those on the wheelchair and is one coupling hook them to steam accessories ...
I made all of forex and diesel tank ...
Crane cable is made of three wires bility, twisted healthy and then painted with black permanent marker.
For drums I used pencil and Chinese forex ...
Follow couplings, boxes of tools and accessories for small infumusetarea model. I'm terribly sorry that I have access to technology type sticker lettering but I think somehow peintez yellow on transparent self-adhesive sheet, which is thick and ugly, but after another method of lettering stick but I do not have ...
Before fixing the protective lacquer paint, dirt and I have dull paint here and there in important ... then the car was taken by the City Blumenberg and sent to work in areas where we began replacing underground cable television. Said happy new workers or their utility.
prognosis:
Vagon macara home made – final
http://trenulete.info/vagon-macara-home-made-final/
Film cu rulajul vagonului macara realizat integral acasa dupa imagini de pe net.
http://www.youtube.com/watch?v=Cru7Xr708g4
Навигация
[0] Списък на темите
Премини на пълна версия