Макетиране и техники на макетирането | All about layouts > Похвалете се с вашия макет | Show us Your layout
Prognosis H0 model railroad - "The town from the dining room"
prognosis:
Stipp Auhagen Briescht building from -2
http://trenulete.info/cladirea-briescht-de-la-auhagen-stipp-2/
Construction of the station Auhagen continued today with the achievement of all nu.2 depot building. According to sketch this building is an annex side of the main station. Continuing the tradition and already has some experience, we have made and this work just like the previous ones.
In this section we encountered a problem roof design, which did not comply with the reality of combining the central building with the roof. After several tests, I found the solution and roof shape so I adapted to combine the two perfectly.
Here you can see the original form of the roof and drew pencil lines and then I made my cuts right changes. It's basically a design fault filmmaker kit, which I easily solved it by changing the geometry of joints according to the pictures.
prognosis:
Stipp Auhagen Briescht building from -3
http://trenulete.info/cladirea-briescht-de-la-auhagen-stipp-3/
The assembly building Depot Station continued with the 3rd wing, a shed with ramp, turn attached to the central building on its side. It's no board. 3 of this group of drawings. Installation are not always clear explanations and in most cases, intervention modellers, with imagination and talent, make work more successful than she designed fot ...
Being somewhat small, it was easier to install, especially as experience is gradually added and operating speeds. In general, such models, it takes longer to bake idea, but the work itself. If they work directly and only paper, it would be much easier, but the work would not have strength, remains somewhat fragile.
And if this holds, I cut out the windows and door frames to see the relief and enter the light after it is mounted on a mini-diorama you prepare as an accessory to Diorama Blumenberg. It will be virtually attached to it one way, a little smaller, a small depot in the age 3-4, with the necessary repairs and gararii of steam. In this way, smaller, can I go I want you and me to rail modelism various exhibitions in the country.
So, the magazine also provides a landing, the left image, which should be installed only by bending the paper print. I made more solid platform from 2.2 mm thick pressboard, over which I pasted printed decoration, to create a stiffer platform than the paper, which anyway had design flaw ... and not fair to the final blend.
Under the building, we set with pieces of adhesive to keep close to the bodies, they would dry up prenadezul which we combined. Note the plus side of a piece of pressboard, which connects the three buildings.
That piece is meant to strengthen the construction underneath, and on the surface, it will decorate the driveway crossings between the two doors, one in the building and the warehouse, and vegetation. In addition we add it and speed relief to the access doors.
At the end of the ramp, the stick spit, I made a small pillar sustinere.Pe rear, no door to the warehouse, but also ramp, which puts me in dilemma. Should I do the frame and on the back? Hmmm! I see the final there.
prognosis:
Stipp Auhagen Briescht building the final -4
http://trenulete.info/cladirea-briescht-de-la-auhagen-stipp-3-final/
Today I finally got to this work. The last pieces were worked to shed the entry ramp deposit, timber shed, and a few trinkets to the decor.
The final result a 3-4 overall construction time, with several buildings, which will equip the whole module you want to achieve in completing diorama Blumenberg. The book, quite laborious, spread over several days, but the result is something much more realistic than plastic, commercial work some more models, which is always enjoyable as the result of excellent work and very low price. Basically I took the computer model made of bottles, I laser-printed and I've used with cardboard pressboard, some match sticks, paper and other trinkets that you no longer lists. The result satisfied me. For those interested in the plans can contact me by email ...
mill:
:good: :good:
lubo_gumata:
Hello. :)
Very good deal :good: :hi:
Навигация
[0] Списък на темите
Премини на пълна версия