Draw small home made
http://trenulete.info/remiza-mica-home-made/An interesting draw, from the base at Fleischmann, has been the subject of my work lately. On the original board, we found inconsistencies between rates written in the drawing and the actual size pieces. Also, the design lacked some components, while others were badly cut. Although I wanted very much a unique draw for my locomotive, I could not use the board and as such we decided Fleischmann recreating the entire drawing. Basically I redesigned by reshaping hall by drawing walls and interior parts so you can use transparent windows and nice to see inside. Finally, the redesign draw on three A4 sheets, up from an initial, I rushed to print after print and I attacked the little hall diligently. Naturally I used the method that I used in my work presentation based on the drawing board and pressboard, the method is not much point to describe in detail.
Es-For its doors open as if it had hinges, I used paper that I gummed it in advance by anointing them with prenadez both sides, so that after drying, this vision of flexible and probabilities without breaking layer prenadez elastic and ensuring durability and mobility. Although the original design to provide windows and doors, created as a model rather childish, I finally decided that the door was not fitted with windows, patterned after the Auhagen did last year.
-At first we decided to achieve the outside, so that the whole building to blend perfectly on the outside, both the windows and cut corners. After closing the main hall, time for the magazine, the building behind the hall, all crafted from strips of cardboard pressboard, which I stuck over the end walls printed on A4 paper.
- He followed the building of glass and window frame transparency, the draw Auhagen patented method. I used black paper, packages from some old fart black and white photographs, maps packed they were to be protected from penetration of light, the paper is that the thing that does not allow light through, very suited to my frame windows ...
- So I cut strips of 1.5 mm and 2.2 mm thick, to make them bay window frames, big enough area. Support base, glass in my case being a simple self-adhesive transparent window lying beautiful model, for then he has woven the correct model, just after the original.
- Finally, windows were plastered on walls and over them I stuck with zidatia interior design, after I cut the original windows of course ...
- He attended the manufacturing floor interior, raised pavement so that they can more easily reach the locomotive depot artisans of PanArin ... Also I made the motherboard, that the sidewalk surrounding the building of the forex of 2.5 mm , then painted in gray. Platforms raised interior will be decorated with yellow stripes flank protection and they will line the interior, where I intend to mount a channel and Enterprise. Otherwise will follow the installation of lighting and installation before he made the roof, but they are subjects Days next activity.
